133 styles

Workhorse blank. Forgiving on press, plays nicely with plastisol.

Fabric

Heavy Cotton

Weight

5.3 oz · 180 GSM

Composition

100% Cotton

Lighter hand than 5000. Watch flash dwell on thinner fabric.

Fabric

Ring Spun

Weight

4.5 oz · 153 GSM

Composition

100% Ring Spun Cotton

Heavyweight open-end cotton — forgiving, slightly textured surface. 156 mesh, 70 duro, dual-stroke on darks. Watch the side seams on the 2000 (vs. seamless 5000) when registering wrap-around art.

Fabric

Heavy Cotton

Weight

6 oz · 203 GSM

Composition

100% US Cotton

Cotton/poly workhorse for team gear. Dye migration is the headline risk on red/maroon/navy — use a low-bleed white, 230 mesh, cap cure at 320°F. Verify with a 24-hour wash test.

Fabric

50/50

Weight

5.5 oz · 186 GSM

Composition

50% Cotton / 50% Polyester

100% poly performance — full dye-migration risk. Required: poly-grade low-bleed white, 230 mesh, cure 280–300°F MAX, no extended flash dwell. Wash-test every dark color before shipping.

Fabric

Performance Poly

Weight

4.5 oz · 153 GSM

Composition

100% Polyester (Aqua-FX / Freshcare)

Long-sleeve sibling of the 5000. For sleeve hits use a 4"×16" sleeve platen; registration drifts on the cuff side — leave 1" of bleed. Cuffs are ribbed; do not attempt prints across the rib.

Fabric

Heavy Cotton

Weight

5.3 oz · 180 GSM

Composition

100% Cotton

Heavy 6 oz long sleeve. Same printing recipe as the 2000 body; sleeve platen required for forearm hits. Pre-press to flatten the knit before registering.

Fabric

Heavy Cotton

Weight

6 oz · 203 GSM

Composition

100% US Cotton

The high-volume team crew. Pre-press 6–8s to flatten fleece, 156 mesh, dual-stroke white underbase on darks. Low-bleed inks required on Red/Royal/Maroon — poly content drives migration.

Fabric

50/50

Weight

8 oz · 271 GSM

Composition

50% Cotton / 50% Polyester

Volume hood. Same recipe as the 18000 crew. Front prints must clear the kangaroo pocket seam by 1"+; the pocket lip telegraphs through heavy ink. Hood seam at the neck distorts top-of-print registration — keep art ≥3" below collar.

Fabric

50/50

Weight

8 oz · 271 GSM

Composition

50% Cotton / 50% Polyester

Full-zip variant — front-print real estate is limited. Keep art ≥1" off the zipper tape on each side; large fronts read better as split left/right panels. Back panel is the safest canvas.

Fabric

50/50

Weight

8 oz · 271 GSM

Composition

50% Cotton / 50% Polyester

Heavier DryBlend hood with moisture-wicking. Treat like a high-migration substrate: low-bleed white, 230 mesh, cure 320°F max, gel-flash between hits.

Fabric

50/50

Weight

9 oz · 305 GSM

Composition

50% Cotton / 50% Polyester

Midweight retail-feel ringspun — the 'between 5000 and 64000' option. 200 mesh, 70 duro, thin ink film. Discharge prints crisp on natural; underbase required on darks.

Fabric

Ring Spun

Weight

5.2 oz · 176 GSM

Composition

100% Ring Spun Cotton

Ringspun version of the 5000 weight. Smoother print surface, holds halftones better. 200 mesh on detail, 156 on solids.

Fabric

Ring Spun

Weight

5.3 oz · 180 GSM

Composition

100% Ring Spun Cotton

Premium ringspun heavyweight. Holds detail like a ringspun but with the body of a 2000 — print like the 76000 but expect a sturdier hand.

Fabric

Heavy Cotton

Weight

6 oz · 203 GSM

Composition

100% Ring Spun Cotton

Youth cut of the 5000. Scale art to youth chest (8–10"); keep ink film thin so the print stays soft on smaller bodies.

Fabric

Heavy Cotton

Weight

5.3 oz · 180 GSM

Composition

100% Cotton

Youth softstyle. Thin fabric — watch flash dwell, scorch easily. 200 mesh, single stroke on whites, dual on darks with a low-build underbase.

Fabric

Ring Spun

Weight

4.5 oz · 153 GSM

Composition

100% Ring Spun Cotton

The retail standard. Fine knit — keep ink films thin.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton

Vintage hand. High dye-migration risk on colored stock.

Fabric

Tri-Blend

Weight

3.8 oz · 130 GSM

Composition

50% Poly / 25% Cotton / 25% Rayon

Heather companion to the 3001. Marled face still prints clean with plastisol; water-based and discharge shine on lighter heathers.

Fabric

50/50

Weight

4.2 oz · 142 GSM

Composition

52% Airlume Combed Ring-Spun Cotton / 48% Polyester, 32 singles (Ath. Heather 90/10)

Adult 3001 construction in youth sizing. Shorter body — confirm placement on mockups before burning screens.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles (Ash 99/1)

Same Airlume body as the 3001 with a V-neck. Drop chest art lower — the neckline eats top real estate.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles (Ash 99/1)

The heavyweight street-style answer to the 3001. Boxier cut, denser body — strong opacity for bold plastisol prints.

Fabric

Heavy Cotton

Weight

6 oz · 203 GSM

Composition

100% Airlume Combed Ring-Spun Cotton

V-neck version of the 3413. Same vintage hand and dye-migration risk — favor water-based or discharge.

Fabric

Tri-Blend

Weight

3.8 oz · 129 GSM

Composition

50% Polyester / 25% Airlume Ring-Spun Cotton / 25% Rayon, 40 singles

Long-sleeve 3001. Use a sleeve board for sleeve hits and add cure time near the ribbed cuff seam.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles (Ash 99/1)

Airlume tank — same printability as the 3001. Narrow shoulders need smaller platens; chest art must clear the armhole.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles (Ash 99/1)

Cutoff-sleeve muscle tank. Wide armholes — keep chest art well inside the opening so it doesn't run off the curve.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles (Heather CVC 52/48; Ath. Heather 90/10)

Mineral/acid/marble/slub washes change fabric and weight per colorway — always confirm the specific color spec before burning screens.

Fabric

50/50

Weight

3.6 oz · 122 GSM

Composition

52% Airlume Ring-Spun Cotton / 48% Polyester, 40 singles (specialty washes 30-32 singles, varies by color)

The go-to printable fleece pullover. Cotton-face sponge holds plastisol well — use pallet adhesive and a low-bleed underbase on darks.

Fabric

50/50

Weight

8 oz · 271 GSM

Composition

52% Airlume Combed Ring-Spun Cotton / 48% Polyester Fleece, 32 singles (DTG colors 70/30 with 100% cotton face)

Full-zip kills the front canvas — keep designs to back or left chest. Make sure platens clear the zipper without bridging.

Fabric

50/50

Weight

8 oz · 271 GSM

Composition

52% Airlume Combed Ring-Spun Cotton / 48% Polyester Fleece, 32 singles

Standard-shoulder companion to the 3719 hoodie. Same sponge fleece print surface — predictable, soft, and forgiving.

Fabric

50/50

Weight

8 oz · 271 GSM

Composition

52% Airlume Combed Ring-Spun Cotton / 48% Polyester Fleece, 32 singles

Drop-shoulder seam shifts the print zone outward — use oversized platens and account for the lower seam on hooped art.

Fabric

50/50

Weight

8 oz · 271 GSM

Composition

52% Airlume Combed Ring-Spun Cotton / 48% Polyester Fleece, 32 singles

Slim feminine cut with longer body. Tighter registration — use a women's platen and plan for lower art placement.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles (Heather CVC 52/48; Ath. Heather 90/10)

The trending oversized women's tee. Boxy fit invites centered front or low chest placement; DTG-ready surface for photo art.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles

V-neck version of the 6400. Same boxy silhouette — keep chest art clear of the deeper neckline.

Fabric

Ring Spun

Weight

4.2 oz · 142 GSM

Composition

100% Airlume Combed Ring-Spun Cotton, 32 singles

Women's scoop-neck tri-blend. Same migration risk as the 3413 — water-based or discharge for the cleanest results.

Fabric

Tri-Blend

Weight

3.8 oz · 129 GSM

Composition

50% Polyester / 25% Airlume Ring-Spun Cotton / 25% Rayon, 40 singles

Drapy poly-viscose racerback — plastisol struggles to bond. Lean on DTG, sublimation, or heat transfer and always test before production.

Fabric

Performance Poly

Weight

3.7 oz · 125 GSM

Composition

65% Polyester / 35% Viscose, 32 singles (Marble 91/9 poly/cotton; Slub 50/37.5/12.5 poly/cotton/rayon)

Smooth print surface, premium feel. Keep mesh high.

Fabric

Ring Spun

Weight

4.3 oz · 145 GSM

Composition

100% Combed Ring Spun Cotton

Soft heather hand. Use low-bleed inks to block poly dye.

Fabric

50/50

Weight

4.3 oz · 145 GSM

Composition

60% Cotton / 40% Polyester

Vintage tri-blend. Full dye-migration risk — low-bleed white underbase, 230 mesh, cure 320°F MAX, gel-flash between hits. Heather speckle telegraphs through thin inks — overbuild the underbase on photoreal art.

Fabric

Tri-Blend

Weight

4.3 oz · 145 GSM

Composition

50% Poly / 25% Cotton / 25% Rayon

V-neck cut of the 6010. Same migration recipe. Top of print should sit ≥3" below the V to avoid distortion at the placket point.

Fabric

Tri-Blend

Weight

4.3 oz · 145 GSM

Composition

50% Poly / 25% Cotton / 25% Rayon

Brushed/sueded face — the soft fuzz holds ink high and prints look matte. Keep mesh at 200+; aggressive pre-press knocks down the nap for sharper edges. Still a poly blend — use low-bleed white on darks.

Fabric

Ring Spun

Weight

4.3 oz · 145 GSM

Composition

60% Cotton / 40% Polyester (Sueded Finish)

USA-grown variant of the 3600. Print recipe is identical — smooth ringspun, 200 mesh on detail, thin ink films to preserve hand.

Fabric

Ring Spun

Weight

4.3 oz · 145 GSM

Composition

100% Combed Ring Spun Cotton (USA-grown)

Long-sleeve 3600. Use a 4"×16" sleeve platen for forearm hits; the knit shifts during pull-on, so loosen registration tolerance.

Fabric

Ring Spun

Weight

4.3 oz · 145 GSM

Composition

100% Combed Ring Spun Cotton

Tank cut of the 3600. Narrow strap — keep top of print ≥3" below neckline. Wide armhole means side-bleed prints need a slimmer platen.

Fabric

Ring Spun

Weight

4.3 oz · 145 GSM

Composition

100% Combed Ring Spun Cotton

Slouchy ladies cut. Print area runs narrower — scale chest art to 10" max width. Same 200-mesh ringspun recipe as the 3600.

Fabric

Ring Spun

Weight

4.3 oz · 145 GSM

Composition

100% Combed Ring Spun Cotton

Slim-fit V-neck. Top of print ≥3" below the V. CVC blend — low-bleed white on darks; cure 320°F max.

Fabric

Ring Spun

Weight

4.3 oz · 145 GSM

Composition

60% Cotton / 40% Polyester

Lightweight pigment-dyed hood. Expect crocking — handle with gloves, don't stack hot. 200 mesh, low-build underbase. Front prints must clear the kangaroo pocket seam by 1"+.

Fabric

50/50

Weight

7.5 oz · 254 GSM

Composition

60% Cotton / 40% Polyester (Pigment-Dyed Fleece)

Lightweight sueded French terry. Unbrushed face prints crisper than fleece, but it's still poly-heavy — low-bleed white, 230 mesh, cure 320°F max.

Fabric

Tri-Blend

Weight

6.5 oz · 220 GSM

Composition

55% Cotton / 45% Polyester (Sueded French Terry)

Pigment-dyed crew sibling of the 9001. Crocking applies — bag prints. Pre-press to flatten the fleece before registering.

Fabric

50/50

Weight

7.5 oz · 254 GSM

Composition

60% Cotton / 40% Polyester (Pigment-Dyed)

The flagship. Soft, washed-out pigment dye. Crocks on first wash — handle with gloves, bag prints, don't stack hot. Discharge unreliable on pigment; default to waterbase soft-hand or low-build plastisol on 200 mesh.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Pigment Dyed

1717 with a chest pocket. Keep left-chest art ≥1.5" off the pocket seam; pigment dye telegraphs the seam edge through ink.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Pigment Dyed

Long-sleeve 1717. Sleeve hits need a 4"×16" platen; expect the cuff side to drift. Same crocking handling as 1717.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Pigment Dyed

Long sleeve + chest pocket. Pocket seam telegraphs through ink — keep left-chest art ≥1.5" off the seam. Sleeve hits need a 4"×16" platen. Same crocking/handling as 1717.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Pigment Dyed

Garment-dyed tank — the actual tank in the line. Narrow shoulder straps; top of print should sit ≥3" below the neckline so it doesn't crash the armhole. Crocking applies.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Pigment Dyed

Cropped boxy cut on the women's body. 10" max print width to clear the side seams. Same crocking handling as 1717.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Pigment Dyed

Hand-dyed 'colorblast' finish — every garment is unique. Treat all colors as substrate variables: white underbase locks down inconsistency, but don't promise color-matched prints across the run. Soft-hand discharge can mottle.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Hand-Dyed

Youth 1717. Smaller chest — cap print at 8–10" wide. Same crocking handling.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Pigment Dyed

Youth version of 1745. Same hand-dyed variability — underbase everything.

Fabric

Pigment Dyed

Weight

6.1 oz · 207 GSM

Composition

100% Ring Spun Cotton, Hand-Dyed

Heavy pigment-dyed crew fleece. Pre-press 6–8s to flatten loop. Crocking is heavy on first wash — bag prints. Default to a low-build white underbase + plastisol top, 156 mesh.

Fabric

Pigment Dyed

Weight

9.5 oz · 322 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Pigment Dyed

Pigment-dyed hood. Front prints must clear the kangaroo pocket seam by 1"+. Hood seam at the neckline distorts top-of-print — keep art ≥3" off collar. Same handling as 1566.

Fabric

Pigment Dyed

Weight

9.5 oz · 322 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Pigment Dyed

Pigment-dyed quarter-zip. Zip placket sits dead-center — split chest art or push it off-axis. Same crocking handling as 1566/1567.

Fabric

Pigment Dyed

Weight

9.5 oz · 322 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Pigment Dyed

Hand-dyed fleece crew. Same color-inconsistency warning as 1745 — underbase everything. Pre-press to flatten loop.

Fabric

Pigment Dyed

Weight

9.5 oz · 322 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Hand-Dyed

Lighter weight than 1566 — thinner loop, ink can sink. Bump up underbase coverage. Same crocking handling.

Fabric

Pigment Dyed

Weight

7.5 oz · 254 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Garment Dyed

Lightweight hood. Same kangaroo pocket + hood seam rules as 1567. Lighter loop — watch ink penetration.

Fabric

Pigment Dyed

Weight

7.5 oz · 254 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Garment Dyed

Youth cut of 1467. Cap print at 8–10" wide; clear the pocket seam.

Fabric

Pigment Dyed

Weight

7.5 oz · 254 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Garment Dyed

Print on the leg with a leg platen; pocket and side-seam areas are off-limits for solid art. Same crocking handling as the fleece line.

Fabric

Pigment Dyed

Weight

7.5 oz · 254 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Garment Dyed

Pigment-dyed jogger. Print on the leg with a leg platen; pocket and side-seam areas are off-limits for solid art.

Fabric

Pigment Dyed

Weight

7.5 oz · 254 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Garment Dyed

Longer body length on the women's fit — keep front print high (top ≥3" off collar) so it doesn't ride into the hem on tucked wear.

Fabric

Pigment Dyed

Weight

9.5 oz · 322 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Pigment Dyed

Women's quarter-zip. Zip placket center; split chest art around it.

Fabric

Pigment Dyed

Weight

9.5 oz · 322 GSM

Composition

80% Ring Spun Cotton / 20% Polyester, Pigment Dyed

Industry-standard heavyweight with Clean Canvas print face. Holds vivid plastisol and water-based with minimal show-through.

Fabric

Heavy Cotton

Weight

6.1 oz · 207 GSM

Composition

100% Ringspun Cotton (Ash 99/1; Light Steel/Pepper Heather 90/10; Heather/CVC 60/40)

Budget heavyweight cousin of the 5180. Print behavior is nearly identical at a lower price — ideal for large runs.

Fabric

Heavy Cotton

Weight

6 oz · 203 GSM

Composition

100% Cotton, 20 singles (Ash 99/1; Light Steel 90/10; Heather/CVC 60/40)

Entry-level midweight. Lighter body means ink can shadow on darks without a proper underbase — best for 1–2 color jobs.

Fabric

Ring Spun

Weight

5 oz · 170 GSM

Composition

100% Cotton, 22 singles (Ash 99/1; Light Steel/Pepper Heather 90/10; Heather/CVC 60/40)

Fine 30-singles ringspun gives an ultra-smooth surface — excellent for soft-hand and discharge inks. Narrower modern cut.

Fabric

Ring Spun

Weight

4.5 oz · 153 GSM

Composition

100% Ringspun Cotton, 30 singles (Ash 99/1; Light Steel 90/10; Heather/CVC 60/40)

Budget event-wear blend. Poly content means dye migration risk on darks — use a low-bleed or migration-blocking underbase.

Fabric

50/50

Weight

5 oz · 170 GSM

Composition

50% Cotton / 50% Polyester (up to 5% recycled poly)

Heavyweight cotton canvas in long-sleeve form. Plan sleeve hits around a 4×16 platen; chest art prints like the 5180.

Fabric

Heavy Cotton

Weight

6.1 oz · 207 GSM

Composition

100% Cotton (Ash 99/1)

Full-poly substrate. Use low-cure dye-migration-blocking inks or move to sublimation — heat is the enemy here.

Fabric

Performance Poly

Weight

4 oz · 136 GSM

Composition

100% Polyester Interlock (UPF 50+)

High-volume printable crew. PrintPro XP face is tight and low-pill — crisp edges with standard plastisol.

Fabric

50/50

Weight

7.8 oz · 265 GSM

Composition

50% US-Grown Cotton / 50% Polyester (PrintPro XP fleece)

The most-printed Hanes hoodie. Predictable print surface for big front-chest or full-front layouts.

Fabric

50/50

Weight

7.8 oz · 265 GSM

Composition

50% Cotton / 50% Polyester (PrintPro XP fleece)

Premium cotton-faced hoodie. Superior opacity with water-based and plastisol — a top pick for branded retail and DTG.

Fabric

Ring Spun

Weight

8 oz · 271 GSM

Composition

80% Cotton / 20% Polyester, 100% ringspun cotton face (Clean Canvas)

Largest color range in the Port & Co tee line. Midweight open-end cotton takes plastisol and discharge reliably — a bulk-decorator standard.

Fabric

Ring Spun

Weight

5.4 oz · 183 GSM

Composition

100% Cotton (Ash 98/2; Athletic Heather 90/10; most Heathers/Neons 50/50)

PC54 body in long-sleeve form. Coordinates with the PC54 color palette — ideal for matching sets.

Fabric

Ring Spun

Weight

5.4 oz · 183 GSM

Composition

100% Cotton (Ash 98/2; Athletic Heather 90/10; select Heathers 50/50)

Resists shrinkage better than pure cotton; use low-bleed/low-cure inks to avoid ghosting on dark blends.

Fabric

50/50

Weight

5.5 oz · 187 GSM

Composition

50% Cotton / 50% Polyester

Heaviest standard Port & Co tee. Dense soft-spun cotton minimizes show-through — great for bold multi-color plastisol.

Fabric

Heavy Cotton

Weight

6.1 oz · 207 GSM

Composition

100% Soft Spun Cotton (Ash 98/2; Athletic Heather 90/10; select Heathers 50/50)

Ringspun construction tightens the print surface — excellent for soft-hand water-based and discharge with fine detail.

Fabric

Ring Spun

Weight

4.5 oz · 153 GSM

Composition

100% Ringspun Cotton, 30 singles (Athletic Heather 90/10; Dark Heather Grey/Heather Navy 50/50)

Garment-dye produces piece-to-piece color variation. Use soft-hand plastisol or water-based; discharge is NOT recommended due to the pigment coating.

Fabric

Pigment Dyed

Weight

5.5 oz · 187 GSM

Composition

100% Pigment-Dyed Ringspun Cotton

Same dye process as PC099 with a left-chest pocket. Keep chest art clear of the pocket and avoid printing over the pocket seam.

Fabric

Pigment Dyed

Weight

5.5 oz · 187 GSM

Composition

100% Pigment-Dyed Ringspun Cotton

Smooth, pill-resistant fleece face. Use firm squeegee pressure to push ink into the pile and confirm full cure.

Fabric

50/50

Weight

7.8 oz · 265 GSM

Composition

50% Cotton / 50% Polyester (air jet yarn fleece)

PC78 body with a two-ply hood. Keep designs on the front chest or back body — the hood does not lay flat for prints.

Fabric

50/50

Weight

7.8 oz · 265 GSM

Composition

50% Cotton / 50% Polyester (air jet yarn fleece)

Heavyweight 9oz fleece with deep pile. Bump ink deposit and dwell time to ensure full penetration and wash durability.

Fabric

50/50

Weight

9 oz · 305 GSM

Composition

50% Cotton / 50% Polyester (heavyweight fleece)

9oz pullover hoodie. Flash fully between colors — the thick pile can trap moisture and hurt adhesion if rushed.

Fabric

50/50

Weight

9 oz · 305 GSM

Composition

50% Cotton / 50% Polyester (heavyweight fleece)

Cotton-faced premium crew. Officially rated for DTG and equally strong for screen — sharpest fleece print in the Port & Co line.

Fabric

Ring Spun

Weight

8.5 oz · 288 GSM

Composition

80% Ringspun Cotton / 20% Polyester, 100% ringspun cotton face (Athletic Heather 75/25; Dark Heather Grey 50/50)

Premium cotton-rich hoodie. Smooth cotton face delivers the cleanest ink transfer of any Port & Co hood — top tier for detailed multi-color work.

Fabric

Ring Spun

Weight

8.5 oz · 288 GSM

Composition

80% Ringspun Cotton / 20% Polyester, 100% ringspun cotton face (Athletic Heather 75/25; Dark Heather Grey 50/50)

Performance poly. Heat is the enemy — keep cure low and fast.

Fabric

Performance Poly

Weight

3.8 oz · 130 GSM

Composition

100% Polyester Interlock

Cationic poly with a cotton hand. Use low-bleed plastisol or poly inks — cationic dyes are more stable than standard sublimation poly, but never assume. Test bleed on every new color.

Fabric

Performance Poly

Weight

4.6 oz · 156 GSM

Composition

100% Cationic Polyester (cotton-feel face)

Long-sleeve ST350. Same dye-migration risk — low cure (≤ 280°F), low-bleed white underbase on darks. Pre-stretch sleeves on the platen to avoid registration drift.

Fabric

Performance Poly

Weight

3.8 oz · 130 GSM

Composition

100% Polyester Interlock

Open mesh knit. Print thicker mesh count (200+) so ink bridges the holes without dropping through. Cardboard or release-paper insert recommended for tight registration.

Fabric

Performance Poly

Weight

3.8 oz · 130 GSM

Composition

100% Polyester Micro-Mesh

3/4 raglan in a wicking tri-blend. Soft hand but watch the rayon — high cure scorches the fibers. Run at 280–300°F max with extended dwell.

Fabric

Tri-Blend

Weight

4.5 oz · 153 GSM

Composition

50% Polyester / 25% Combed Ringspun Cotton / 25% Rayon

Short-sleeve tri-blend wicking tee. Heathered colorways print best with athletic-style halftones — solid coverage will show neps through the ink film.

Fabric

Tri-Blend

Weight

4.5 oz · 153 GSM

Composition

50% Polyester / 25% Combed Ringspun Cotton / 25% Rayon

Workhorse corporate polo. Tight micropique surface holds detail well, but ribbed collar and placket are dye-migration prone — keep cure below 290°F and use a polyester low-bleed underbase.

Fabric

Performance Poly

Weight

4.4 oz · 149 GSM

Composition

100% Polyester Micropique

ST650 with a chest pocket. Register left-chest art ≥1.5" off the pocket edge — pocket seam shifts the print plane and will throw off multi-color registration.

Fabric

Performance Poly

Weight

4.4 oz · 149 GSM

Composition

100% Polyester Micropique

Lightweight mesh polo. Same playbook as ST340 — high-mesh-count screens, sub-290°F cure, low-bleed underbase on darks.

Fabric

Performance Poly

Weight

3.8 oz · 130 GSM

Composition

100% Polyester RacerMesh

Heathered poly polo. The melange yarns are sublimation-dyed — assume migration risk on every color. Always test wash a strike-off before production.

Fabric

Performance Poly

Weight

5.4 oz · 183 GSM

Composition

100% Heathered Polyester Jersey

Mid-weight team hood. Cotton-rich face plays well with plastisol; brushed fleece needs a flash + smooth roller pass to lay the fibers down before color.

Fabric

50/50

Weight

9 oz · 305 GSM

Composition

65% Cotton / 35% Polyester Fleece (50/50 in heathers)

Quarter-zip pullover sweatshirt. Avoid centered front prints — zipper seam runs the full chest. Left-chest and back prints only.

Fabric

50/50

Weight

9 oz · 305 GSM

Composition

65% Cotton / 35% Polyester Fleece (50/50 in heathers)

Ladies cut of the ST350. Scale chest prints to ladies platen (~10–11") and watch dye migration on True Red and True Royal in particular.

Fabric

Performance Poly

Weight

3.8 oz · 130 GSM

Composition

100% Polyester Interlock

Buttery ultrafine organic ringspun. Print thin — 230 mesh, 70 duro single stroke. Low-impact dyes are stable but minimize flash dwell to protect the hand.

Fabric

Ring Spun

Weight

4.6 oz · 156 GSM

Composition

100% GOTS Organic Combed Ring-Spun Cotton

Heavier soft-hand ringspun with set-in sleeves. Underbase required on darks; 156–200 mesh, 70 duro. Plays well with discharge on natural and ivory.

Fabric

Ring Spun

Weight

5.5 oz · 186 GSM

Composition

100% Organic Combed Ring-Spun Cotton

Youth cut of the 200. Scale prints to youth chest (8–10") and keep ink films thin so the hand stays soft for kids.

Fabric

Ring Spun

Weight

5.5 oz · 186 GSM

Composition

100% Organic Combed Ring-Spun Cotton

200 body with a chest pocket. Avoid front-print layouts that cross the pocket seam — register left-chest art ≥1.5" off the pocket edge.

Fabric

Ring Spun

Weight

5.5 oz · 186 GSM

Composition

100% Organic Combed Ring-Spun Cotton

Long-sleeve 200. For sleeve hits use a 4"×16" sleeve platen; keep registration loose — knit shifts during pull-on.

Fabric

Ring Spun

Weight

5.5 oz · 186 GSM

Composition

100% Organic Combed Ring-Spun Cotton

220 with a chest pocket. Same sleeve-print workflow as the 220; mind the pocket seam on front art.

Fabric

Ring Spun

Weight

5.5 oz · 186 GSM

Composition

100% Organic Combed Ring-Spun Cotton

Heavy cotton fleece mock-neck. Pre-lint the platen; 110–156 mesh handles the brushed surface. Discharge prints beautifully on naturals.

Fabric

Heavy Cotton

Weight

9 oz · 305 GSM

Composition

100% Organic Cotton Fleece

The shop workhorse hood. 156 mesh, 60–70 duro, dual-stroke with a white underbase on darks. Pre-press 6–8s to flatten fleece nap; avoid heavy ink films across the kangaroo pocket seam.

Fabric

50/50

Weight

8.5 oz · 288 GSM

Composition

80% Cotton / 20% Polyester

Crew sibling of the SS4500. Same press recipe — pre-press, white underbase on darks, 156 mesh. Watch dye migration on red/maroon; bump LO underbase or use poly-safe inks.

Fabric

50/50

Weight

8.5 oz · 288 GSM

Composition

80% Cotton / 20% Polyester

Garment-dyed premium hood. Expect color crocking — handle with gloves and test wash. Discharge is hit-or-miss on pigment dyes; waterbase with a soft-hand additive on 200 mesh is the safer move. Avoid solvent-heavy spot cleaners on press.

Fabric

Pigment Dyed

Weight

10 oz · 339 GSM

Composition

80% Ringspun Cotton / 20% Polyester (Pigment-Dyed)

Soft brushed special-blend. Treat like a tri-blend for migration: low-bleed white on 200 mesh, cure at 320°F max, gel-flash between hits. Heather speckle telegraphs through thin inks — overbuild the underbase on photo-real art.

Fabric

Tri-Blend

Weight

8 oz · 271 GSM

Composition

60% Cotton / 40% Polyester (Special Blend Fleece)

Lightweight zip hood — print only on the back panel or sleeve. Front prints must clear the zipper tape and pocket openings by 1" minimum. Use a sleeve platen for forearm hits; jaws open at the zip will distort registration.

Fabric

50/50

Weight

6.5 oz · 220 GSM

Composition

60% Cotton / 40% Polyester

100% polyester performance hood — dye migration is the whole game. Use a low-bleed/poly-specific white, 230 mesh, cure 280–300°F max, and verify with a wash test on red, navy, and royal before production. Avoid extended flash dwell.

Fabric

Performance Poly

Weight

6.4 oz · 217 GSM

Composition

100% Polyester (Poly-Tech Fleece)

The 'heavy hood' staple. Thick fleece needs a firm pre-press and a robust underbase (dual-stroke, flash, second white). 156 mesh, 70 duro. Cure verified with a temp gun on the back center, not the surface — fleece insulates.

Fabric

50/50

Weight

10 oz · 339 GSM

Composition

80% Cotton / 20% Polyester

Heavy pigment-dyed crew. Crocking is normal — bag prints and don't stack hot off the dryer. Discharge is unreliable on the dye system; default to waterbase with soft-hand or low-build plastisol on 200 mesh.

Fabric

Pigment Dyed

Weight

10 oz · 339 GSM

Composition

80% Ringspun Cotton / 20% Polyester (Pigment-Dyed)

Heathered raglan crew — treat as a migration risk. Low-bleed white underbase, 200 mesh, cap cure at 320°F. Keep ink films thin so the brushed hand survives.

Fabric

Tri-Blend

Weight

8 oz · 271 GSM

Composition

60% Cotton / 40% Polyester (Special Blend)

Unbrushed French terry — flatter surface than fleece, so prints register crisper. Still poly-heavy: low-bleed white, 200–230 mesh, cure 320°F. Pre-press to knock down loop texture on detail art.

Fabric

Tri-Blend

Weight

7.3 oz · 247 GSM

Composition

55% Cotton / 45% Polyester (French Terry)

The flagship 7.2oz heavyweight tee. Dense knit holds halftones cleanly — 156–230 mesh, 70 duro, dual-stroke on darks. Pre-press to flatten before registration; the thick body resists pull-down on lighter platens.

Fabric

Heavy Cotton

Weight

7.2 oz · 244 GSM

Composition

100% Ring Spun Cotton

Long-sleeve LS15000. Use a 4"×16" sleeve platen for forearm hits; cuff side drifts — leave 1" bleed and loosen registration tolerance.

Fabric

Heavy Cotton

Weight

7.2 oz · 244 GSM

Composition

100% Ring Spun Cotton

Drop-shoulder, washed-down 'urban' fit. Wider chest print area — scale art up to 14". Garment wash softens the face; pre-press hard or detail will sink. 200 mesh on detail.

Fabric

Heavy Cotton

Weight

7 oz · 237 GSM

Composition

100% Ring Spun Cotton (Garment-Washed)

Long-sleeve LS14004. Drop shoulder shifts the sleeve hit further down the arm — re-measure placement; don't rely on the standard sleeve-platen registration.

Fabric

Heavy Cotton

Weight

7 oz · 237 GSM

Composition

100% Ring Spun Cotton (Garment-Washed)

Beast-weight 14oz fleece crew. Pre-press 8–10s — the loop is deep. 110–156 mesh, dual-stroke white underbase, second flash, color top. Cure with a temp gun on the back panel; fleece insulates surface readings.

Fabric

Heavy Cotton

Weight

14 oz · 475 GSM

Composition

80% Ring Spun Cotton / 20% Polyester (Heavyweight Fleece)

Heavyweight hood sibling of LS14002. Same press recipe. Front prints must clear the kangaroo pocket seam by 1"+. Hood seam at neckline distorts top-of-print — keep art ≥3" off the collar.

Fabric

Heavy Cotton

Weight

14 oz · 475 GSM

Composition

80% Ring Spun Cotton / 20% Polyester (Heavyweight Fleece)

Mid-heavy crew — friendlier on press than the 14oz Urban. Pre-press 6s, 156 mesh, single-flash underbase on darks. Watch dye migration on Maroon and Navy — use low-bleed white.

Fabric

50/50

Weight

9 oz · 305 GSM

Composition

80% Ring Spun Cotton / 20% Polyester

Mid-heavy hood. Same recipe as the LS13001 crew. Standard hood/pocket-seam clearances apply.

Fabric

50/50

Weight

9 oz · 305 GSM

Composition

80% Ring Spun Cotton / 20% Polyester

13oz heavyweight hood — between the LS13002 and the 14oz Urban. Pre-press 8s; 110–156 mesh; dual-stroke underbase. Verify cure on the back, not the surface.

Fabric

50/50

Weight

13 oz · 441 GSM

Composition

80% Ring Spun Cotton / 20% Polyester

Youth cut of the LS15000. Scale chest art to 8–10"; keep ink films thin so the heavy body doesn't go armor-stiff on smaller frames.

Fabric

Heavy Cotton

Weight

7.2 oz · 244 GSM

Composition

100% Ring Spun Cotton

Cropped boxy fit — shorter body length, wider through the chest. Adjust print placement up; standard 3.5" off neckline puts art too low. Confirm chest centerline on the actual garment.

Fabric

Heavy Cotton

Weight

7.2 oz · 244 GSM

Composition

100% Ring Spun Cotton